Stainless-works 310-170 Jeep Grand Cherokee 5.7/6.1L 2005-10 AIRAI User Manual download pdf

Installation Instructions

Part Number 310-170

2005-10 Jeep Grand Cherokee 5.7L

2006-10 Jeep Grand Cherokee SRT-8

6.1L

7. Re-install the breather hose and speed

clamp (#8) onto the nipple on the Quick Fit

Panel. If you are working on a 6.1L, install

the 1/2”x 90° elbow (#9) from the breather

hose to the nipple on the Quick Fit Panel.

8. Install the Airaid Premium Filter (#1) onto

the tube on the Quick Fit Panels, and tighten

the clamp.

9. Install the weather strip (#4) onto the top

of the Quick Fit Panels. (Hint: For ease of

installation, start at one end and work your

way to the other).

Packing List:

#1 700-458 Airaid Premium Filter 1

#2 KIT170MAFC MAF Panel 1

#3 KIT170FPC Front Panel 1

#4 KITWSTRIP02 Weather Strip 17 1/2” 1

KIT170HP Hardware & Instructions 1

#5 KIT6C31MXPPZ 6-32 x 5/16” Screw 4

#6 KIT6NWSAPZ #6 Flat Washer 4

#7 KIT6CNKEPZ 6-32 Keps Nut 4

#8 KITSNP16M4 Speed Clamp 1

#9 KITELBOW04 1/2” x 90° Elbow 1

Tools Required For Installation:

5/16” Socket

Ratchet & Extension

Phillips Screwdriver

1. Disconnect the negative battery cable.

Using a 5/16” socket, loosen the hose clamp

on the factory airbox lid. Twist and remove

the breather hose from the factory airbox lid.

2. Unlatch the two clips on the front of the

factory airbox lid.

3. Remove the factory airbox lid by sliding it

forward, and then up and out of the factory

intake tube.

4. Remove the factory air filter from the air-

box base.

5. Assemble the Quick Fit Panels (#2, #3)

using four 6-32 x 5/16” screws (#5), #6 flat

washers (#6), and 6-32 keps nuts (#7).

6. Install the Quick Fit Panels by sliding the

four tabs on the back of the panels into the

factory airbox base, and then into the factory

intake tube. Relatch the two factory clips into

the slots on the front of the Quick Fit Panels .

Tighten the hose clamp on the factory intake

tube.

C.A.R.B. E.O. Number Applies Only To

Listed Vehicles Up Thru 2008 Models

All Others Pending

1 2

All Others Pending 1
Before! 2

Summary of Contents

Page 1 - All Others Pending

Installation Instructions Part Number 310-170 2005-10 Jeep Grand Cherokee 5.7L 2006-10 Jeep Grand Cherokee SRT-8 6.1L 7. Re-install the breather hos

Page 2 - Before!

10. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 11.

Comments to this Manuals

No comments

Stainless-works 310-170 Jeep Grand Cherokee 5.7/6.1L 2005-10 AIRAI User Manual

Browse online or download User Manual for For the car Stainless-works 310-170 Jeep Grand Cherokee 5.7/6.1L 2005-10 AIRAI. Stainless Works 310-170 Jeep Grand Cherokee 5.7/6.1L 2005-10 AIRAID Intake System User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Stainless-works 310-170 Jeep Grand Cherokee 5.7/6.1L 2005-10 AIRAI